Related Searches
Oil and gas Safety Officer interview questions and Answers pdf
What are basic interview questions for safety officer?
Fire and safety officer interview questions and answers pdf
Fire and Safety interview questions pdf
Safety Interview Questions Answers
Q- In what time does the incident report should be made?
a) After 1 hour
b) After 2 hours
c) Immediately
d) All of the above
Ans- c) Immediately
Q- _______ is to ensure the dangerous machines or live lines are isolated and not able to start before completion of maintenance or repair work.
a) Work Permit system
b) Method of statement
c) LOTO
d) Safety Procedure
Ans- c) LOTO
Q- _________is a formal written system used to control certain types of activity that are potentially hazardous.
a) Method of statement
b) Warning Signage
c) Permit
d) All of the above
Ans- c) Permit
Q- When a major gas release occurred and you’re inside an office, you should___________
a) Proceed to the Safe assembly area
b) Stay indoors and wait for instructions
c) Run and evacuate the plant
d) Assist the emergency responders
Ans- b) Stay indoors and wait for instructions
Q- What does Confined Space Entry Permit is actually permitting to do?
a) To enter and work
b) To work inside and inspect
c) To enter only
d) A and B
Ans- c) To enter only
Q- What fall protection to use if a structure is not having permanent platform?
a) Scaffolding
b) SCBA
c) Full body Safety harness
d) None of the above
Ans- c) Full body Safety harness
Q- Confined Space hazards are_____________
a) Oxygen deficiency
b) Engulfment of material
c) Falling Hazard
d) All of the above
Ans- d) All of the above
Q- What is the main concern when gas testing in open space?
a) Toxic, Combustible
b) Oxygen, Toxic
c) Combustible, Air Quality
d) All of the above
Ans- a) Toxic, Combustible
Q- Where do we use (3) Three-point contact system?
a) Electrical safety (earth grounding point)
b) Climbing or ascending
c) Lifting activity
d) All of the above
Ans- b) Climbing or ascending
Q- Explain the purpose of Whiplash Arrestor.
Ans- To prevent serious injuries and accidents in case the coupling of hose connection is failed/disconnected.
Q- Why it’s important to check emergency showers?
Ans- To ensure the emergency showers are at ready condition when emergency occurs.
Q- What is the purpose of a Job Safety analysis?
Ans- The purpose of job safety analysis is to identify the hazards and control measures of the job by breaking it down into step-by-step jobs.
Q- What is the purpose of an MPS (Manual Pull station)
Ans- To alert all personnel and the Emergency Response Team about the emergency at the site.
Q- What is the importance of gas testing?
Ans- Gas testing is done to make sure the working environment is safe to carry out the task.
Q- What is the main hazard working inside the deep trench?
Ans-
- Cave-in
- Entrapment
- Drowning
Q- What is the purpose of a dike wall provided for large tank/vessels?
Ans- A dike wall is a barrier to contain the full volume of the liquid in case of leakage or failure.
Q- In Fire Safety, what is the purpose of a monthly inspection?
Ans- The objective is to simply identify any obvious deficiency or faulty equipment.
Q- What does the color of the NFPA diamond represent?
Ans- Red- Flammable hazard
Blue- Health hazard
Yellow- Stability hazard
White- Specific hazard
Q- Give 1 example of an Unsafe Act/behavior
Ans- Workers working without PPE.
Q- (Hydro jetting) It is allowable to have multiple hydro jet activities inside a narrow-confined space if a safety officer and supervisor are available.
a) Yes
b) No
Ans- b) No, Because there is a high risk of personnel injuring themselves or others.
Q- In rainy weather an open area is allowed especially if it’s an emergency work situation and PPE is worn.
a) Yes
b) No
Ans- b) No, Because all works need to be stopped at adverse weather conditions.
Q- In a chemical complex, self-modification (tampering) of PPE is allowed.
a) Yes
b) No
Ans- b) No, PPE should not be altered or tampered with at any cost.
Q- “In gas testing”- an oxygen quality test is required for open areas.
a) Yes
b) No
Ans- b) No, Because the oxygen quality may change as per conditions. But this is conditional such as working in excavation depth >1.2m. Hot work near HC lines etc.
Q- “In Personal Protective Equipment”- It is okay to wear looses clothing when working with rotating equipment.
a) Yes
b) No
Ans- b) No, Because loose clothing has a high risk of entanglement while working with rotatory equipment.
Q- In Incident reporting- If an incident occurred and none was hurt or damaged, a toolbox talk should be made immediately to aware the people.
a) Yes
b) No
Ans- a) Yes, To aware people of the consequence of near misses and to maintain continual improvement of safety standards.
Q- What are the parts of the scaffolding.
a) Coupler
b) Standard (Post)
c) Platform (planks)
d) Sole Board (Sill)
e) Mid Rail
f) Self-closing drop bar
g) Top Rail
h) Ladder
i) Sole plate
j) Toe Board
Q- What are the eight safety requirements needed to provide at the site before starting a confined space activity? (not including permit and standby man)
Ans-
1 Hazard identification plan, Job safety analysis, method statement.
2 Isolation
3 Purging
4 Ventilation
5 Gas Testing
6 Confined space entry and rescue plan
7 Lightings
8 Training for all entrant
9 Barricade and signages
10 LMRA
11 PPE’s
12 Communication devices at the site for communication.
Read Also
Download Free Piping PDF for Interview Preparation